Well after all the questions I've been asking I started the build.:)
It's about 50/50 scrap wood I have and some new stuff from Lowes. Its going pretty good but the scrap is harder to work with being bent and lots of cracks.
Well I got the base together and used liberal amounts of wood putty to fill the bad areas.![]( "Image: https://us.v-cdn.net/5017260/uploads/editor/ct/j58p1tuamh1l.jpg")
Put the first coat of paint...
![]( "Image: https://us.v-cdn.net/5017260/uploads/editor/u0/byb3v7u5owpp.jpg")
I got some of the cheaper 1x6 from Lowes so I'm going to put that on the lower deck in the morning. Just trying to come up with what the top needs to be.
I've seen some tables with gaps between the boards on the bottom...was considering doing that for air flow.
It's about 50/50 scrap wood I have and some new stuff from Lowes. Its going pretty good but the scrap is harder to work with being bent and lots of cracks.
Well I got the base together and used liberal amounts of wood putty to fill the bad areas.
Put the first coat of paint...
I got some of the cheaper 1x6 from Lowes so I'm going to put that on the lower deck in the morning. Just trying to come up with what the top needs to be.
I've seen some tables with gaps between the boards on the bottom...was considering doing that for air flow.