Hi all,
I'm having some cabinetry made for my Large BGE and MiniMax. Anticipating that both will go on table nests (with possible firebrick underneath of that). I have an outdoor built-in fridge that will go in right side. 42" hood vent will be mounted above the eggs, so I wanted to have them together centered in the middle.
Any other thoughts ideas on the design of this?
This cabinet will be up against a wall, so the one thing I wanted to point out to who's helping make it is that the large BGE needs depth clearance when the top opens up all the way so was planning on making the entire depth be 33" which I think should give me plenty of clearance to open lid fully without bumping into wall behind it.
Trying to finalize all of this in next 24-48 hours so greatly appreciate any feedback! (Triangles are representing the two Eggs). Likely Soapstone as the countertop finish.
![]( "Image: https://us.v-cdn.net/5017260/uploads/editor/d0/slwdsrqmhexu.png")
I'm having some cabinetry made for my Large BGE and MiniMax. Anticipating that both will go on table nests (with possible firebrick underneath of that). I have an outdoor built-in fridge that will go in right side. 42" hood vent will be mounted above the eggs, so I wanted to have them together centered in the middle.
Any other thoughts ideas on the design of this?
This cabinet will be up against a wall, so the one thing I wanted to point out to who's helping make it is that the large BGE needs depth clearance when the top opens up all the way so was planning on making the entire depth be 33" which I think should give me plenty of clearance to open lid fully without bumping into wall behind it.
Trying to finalize all of this in next 24-48 hours so greatly appreciate any feedback! (Triangles are representing the two Eggs). Likely Soapstone as the countertop finish.
