I have a lot of stuff accumulated that goes with my XL BGE. More than I EVER had even after 30 years of Weber! So, Now I've got pizza stones, plate setter, minimum of 40lb of lump at ALL times, and all the Rest of the stuff to make this work.
So, I've started making an 'Egg Crate' to store everything. I'll be stationary, but WILL have casters so if I must, I Will be able to move it.
I've started building frames for each side. And experimenting with a Pocket Hole tool. That will come in handy when I start on the TABLE, sometime later this fall.
Anyway, this is the first photo of what is in progress. All 4 side frames are done and routed. This is as I was drilling pockets to attach the various pieces together. Final product will have a plywood 'floor' and I'm thinking CEDAR for the tip-off lid.![]( "Image: http://cd8ba0b44a15c10065fd-24461f391e20b7336331d5789078af53.r23.cf1.rackcdn.com/biggreenegg.vanillaforums.com/editor/qq/1qefwxbaoq93.jpg")
This is the pocket jig on the base I made and clamped TO my 'bench'. The vacuum is 30+ years old and keeps the work area clean. Next phase of assembly starts TOMORROW!
So, I've started making an 'Egg Crate' to store everything. I'll be stationary, but WILL have casters so if I must, I Will be able to move it.
I've started building frames for each side. And experimenting with a Pocket Hole tool. That will come in handy when I start on the TABLE, sometime later this fall.
Anyway, this is the first photo of what is in progress. All 4 side frames are done and routed. This is as I was drilling pockets to attach the various pieces together. Final product will have a plywood 'floor' and I'm thinking CEDAR for the tip-off lid.
This is the pocket jig on the base I made and clamped TO my 'bench'. The vacuum is 30+ years old and keeps the work area clean. Next phase of assembly starts TOMORROW!