I bought a table with the following dimensions from a local company that makes the tables for Primo:
32Hx60Wx29D
I then purchased a Duck's cover from Amazon with the following dimensions:
56Hx60Wx27D
Note when I bought the Duck's cover I didn't pay much attention to the dimensions. I just assumed it would fit. The problem is the cover isn't long enough. I can't find good info on the BGE branded one to know if it will fit.
I originally went with the Duck's cover trying to save money ($30 vs. $100+), but I'm willing to try the BGE one or any one that will actually fit at this point. I spent too much time sealing the table to leave it exposed. I'd appreciate any advice on a cover that will fit.
![]( "Image: http://cd8ba0b44a15c10065fd-24461f391e20b7336331d5789078af53.r23.cf1.rackcdn.com/biggreenegg.vanillaforums.com/editor/xr/oiyzxyl9jom3.jpg")
32Hx60Wx29D
I then purchased a Duck's cover from Amazon with the following dimensions:
56Hx60Wx27D
Note when I bought the Duck's cover I didn't pay much attention to the dimensions. I just assumed it would fit. The problem is the cover isn't long enough. I can't find good info on the BGE branded one to know if it will fit.
I originally went with the Duck's cover trying to save money ($30 vs. $100+), but I'm willing to try the BGE one or any one that will actually fit at this point. I spent too much time sealing the table to leave it exposed. I'd appreciate any advice on a cover that will fit.
