Finished Large BGE Table - Cypress w/Granite Top (Pics Attached)

Eggheaders,

Thanks for all the advice on a previous post.  This was my first 'major' woodworking project.  This forum has a wealth of information.

Details for the readers / future table builders:

• Created plan in SketchUp from a mix of others.  Started with NakedWhiz's plan and modified.  
• Louisiana Cypress Wood - rough cut
• Granite top 2cm. Glued with Loctite Ultimate Construction Adhesive 
• Finish: Exterior 450 Satin (I spent a lot of time researching what to do here.  There are several opinions.  I almost went with Sikkens or untinted exterior paint, but decided to go with Exterior 450.  My local Woodcraft recommended it.  I am pleased with the performance so far.)
• No wood stain
• Enclosed the sides and back by shiplapping boards (with a router) together and kreg jig the top and bottom to frame
• All frame joints are kreg "jigged" 
• European hinges for doors
• BGE Table Nest 
• Porcelain Tile for Table Nest
• Casters from castercity.com - these people are very helpful (4" Black Polyolefin Ball Bearing Wheel with hole for your own lag bolt - I used a 3 1/2" lag bolt.  May be overkill, but I did not want the caster to break the table leg.)
• Rev-A-Shelf 9" shelving system for storage
• Ordered a customer vinyl cover from "Covers by Mel" (http://www.vinylcoveringsbymel.com/index.html).  Other options were BGE brand cover, Duck covers, or a sunbrella cover.

Photos: